Page Comparison

...

Requirements

• Kubectl, Helm and MQTT CLI https://hivemq.atlassian.net/wiki/spaces/HMS/pages/2700902571

• Amazon Account

• HiveMQ License (optional)

• Install Amazon CLI

  • The AWS Command Line Interface is an open-source tool that enables you to interact with AWS services using commands in your command-line shell.
    To install the AWS CLI on macOS with Homebrew, open a terminal and enter the following. For other operating systems, see AWS CLI installation.

    Code Block
    brew install awscli

  • Verify AWS CLI Installation: Open a new terminal or command prompt and run the following command. This should display the installed AWS CLI version.(For us , its aws-cli/2.15.17 Python/3.11.7 Darwin/23.3.0 source/arm64 prompt/off)

    Code Block
    aws --version

• Configure AWS CLI: After installing the AWS CLI, do the following steps to configure it. (For more information, see Configure the AWS CLI in the AWS Command Line Interface User Guide.)

  • If you do not have existing access keys, please use the steps here to create new access key and note it or download the csv file.

  • Run the following command

    Code Block
    aws configure

    • Optionally, you can configure a named profile, such as --profile cluster-admin. If you configure a named profile in the AWS CLI, you must always pass this flag in subsequent commands. E.g. aws configure --profile cluster-admin

  • This command will prompt you to enter the following information:

    • AWS Access Key ID: Enter your AWS access key.

    • AWS Secret Access Key: Enter your AWS secret key.

    • Default region name: Enter the AWS region you want to use (e.g., us-eastwest-1).

    • Default output format: You can leave this as json.
      For example:

      Code Block
      AWS Access Key ID [None]: AKIAI#####LE AWS Secret Access Key [None]: wJal####KEY Default region name [None]: us-eastwest-1 Default output format [None]: json

• EKS CLI (eksctl)
  eksctl is a command line tool for working with EKS clusters that automates many individual tasks. To install the AWS CLI on macOS with Homebrew, open a terminal and enter the following. For other operating systems, see the installation in eksctl documentation.

  Code Block
  brew tap weaveworks/tap && brew install weaveworks/tap/eksctl

• Kubectl, Helm and MQTT CLI https://hivemq.atlassian.net/wiki/spaces/HMS/pages/2700902571

Set Up Your Kubernetes Cluster With Elastic Kubernetes Service (EKS)

1. Create a New IAM User

   1. Run the following command to create a new IAM user:

      Code Block
      aws iam create-user --user-name hivemq-user

   2. Attach AdministratorAccess Policy

      Run the following command to attach the AdministratorAccess policy to the newly created user:

      Code Block
      aws iam attach-user-policy --user-name hivemq-user --policy-arn arn:aws:iam::aws:policy/AdministratorAccess

   3. Create Access Key

      Run the following command to create an access key for the user:

      Code Block
      aws iam create-access-key --user-name hivemq-user

   4. Following is the output displayed after the successful creation of the access key, Please copy and save AccessKeyId and SecretAccessKey values for the next steps.

      Code Block
      {     "AccessKey": {         "UserName": "test-user",         "AccessKeyId": "AKIXXXXXXF2PH",         "Status": "Active",         "SecretAccessKey": "cRIs2aXXXXXXAEi",         "CreateDate": "2024-02-01T11:10:59+00:00"     } }

   5. Run the following command:

      Code Block
      aws configure

      1. Optionally, you can configure a named profile, such as --profile cluster-admin. If you configure a named profile in the AWS CLI, you must always pass this flag in subsequent commands.

   6. This command will prompt you to enter the following information:

      1. AWS Access Key ID: Enter your AWS access key.

      2. AWS Secret Access Key: Enter your AWS secret key.

      3. Default region name: Enter the AWS region you want to use (e.g., us-eastwest-1).

      4. Default output format: You can leave this as json.
         For example:

         Code Block
         AWS Access Key ID [None]: AKIAIOSFODNN7EXAMPLE AWS Secret Access Key [None]: wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY Default region name [None]: us-eastwest-1 Default output format [None]: json

...

1. To create an EKS cluster with all the necessary resources for your cluster, enter the following command with the desired location (in this procedure, we use eu-eastwest-1) and instance type c5.2xlarge (8 CPUs, 16 GiB RAM), enter the following command and wait until the process completes. Processing time take up to ~5 minutes and can vary:

eksctl create cluster \
  --name HiveMQCluster \
  --region eu-eastwest-1 \
  --node-type c5.2xlarge \
  --version 1.27 \
  --nodes 4

...

1. To manage the resulting Kubernetes cluster with kubectl, download the access credentials of the cluster: (region eu-west-1 in our case, please replace it with your region)

   Code Block
   aws eks --region eu-west-1 update-kubeconfig --name HiveMQCluster

2. To verify that all three nodes are available, enter:

   Code Block
   kubectl get nodes

3. The output from the command is similar to the following: (k8s v1.27.9 in our case, it might be different for you)

...

1. List all services running in your cluster.

   Code Block
   kubectl get svc --all-namespaces

2. Delete any services that have an associated EXTERNAL-IPvalue. These services are fronted by an Elastic Load Balancing load balancer, and you must delete them in Kubernetes to allow the load balancer and associated resources to be properly released.

   Code Block
   kubectl delete svc service-name

3. Delete the load balancer from AWS console.

4. Delete the cluster and its associated nodes with the following command,

   Code Block
   eksctl delete cluster --name HiveMQCluster --region eu-west-1

...